Tel: 0129-4001010 Phone: +91 730 321 5033
Email: cs@absoluteveritas.com
BIS CERTIFICATION FOR LOW CARBON STEEL WIRE IS 4882:1979
In today's competitive landscape, maintaining market presence without a certified, high-quality product can be challenging. Obtaining a BIS license may also be essential for selling products in the Indian market. To achieve BIS certification and ensure product quality, manufacturers must adhere to the specified Indian standards.
Let's delve deeper into at IS 4882:1979 for low carbon steel wire rivets for use in bearing industry.
This standard specifies the specifications for low carbon steel wire rivets used in the bearing industry.
Steel should be manufactured utilizing an open hearth, electric, acid Bessemer, duplex, basic oxygen process, or a combination thereof. Prior approval from the purchaser is necessary if the manufacturer opts for a different process. In cases where the basic oxygen process is utilized, the nitrogen content should not surpass 0.007 percent.
Steel must be fully killed, with a minimum silicon content of 0.1 percent for silicon killed steel. Each ingot should undergo adequate reduction and discard to eliminate piping, segregation, and other defects. Ingots, blooms, or billets must be rough machined, chipped, ground, or otherwise prepared to remove surface imperfections that could lead to defects in the finished wire. The finished wire must be precisely and cleanly drawn to the specified size, ensuring it is in excellent condition without any splits or surface flaws.
A well-maintained laboratory is essential for conducting various tests according to the methods outlined in the standard. Steel must meet the requirements specified in the standard when subjected to testing.
PACKING AND MARKING
The wire should be provided in coil form and packaged securely to prevent corrosion during transportation. Each coil must be labeled with the wire's nominal size, coil weight, manufacturing date, and manufacturer's name or trademark. Optionally, each coil may bear a standard mark (ISI Mark). Manufacturers are required to obtain a BIS license from the Bureau of Indian Standards to use the standard mark (ISI Mark), which is granted upon meeting all relevant requirements of applicable Indian standards.
PROCESS FOR BIS ISI MARK CERTIFICATION
BIS CERTIFICATION PROCESS
Acquiring a BIS license requires a comprehensive review of manufacturing infrastructure, quality control abilities, testing resources, and production procedures. This thorough assessment guarantees that products not only adhere to regulations but also prioritize consumer safety and reliability.
NOTE:
For comprehensive guidance on the BIS ISI Certification process, please explore:
WHY USE ABSOLUTE VERITAS?
Absolute Veritas is a prominent organisation from the private sector of India primarily dealing with the Inspection, Testing, Audits, Certification of products& consulting services to various industries in India and worldwide, ensuring compliance with regulatory standards and industry requirements. Offering a comprehensive range of services including product certification, testing, training, auditing, and compliance services, Absolute Veritas helps manufacturers and importers achieve higher production efficiency and quality standards.
Absolute Veritas (AV) will handle end to end pre-registration request, sample preparation, documentation, testing and application process for FMCS Certification
For any questions regarding the most recent update on FMCS registration licenses, please reach out to us via email at cs@absoluteveritas.com
❮
